- What are all the components that will have data permission security control access?
- What are all the People Tools Security?
- What are all the Access types for People with job security sets?
- What are all the Access types for Template-Based Hire security sets?
Payroll Processing Flow | Part 1 | PeopleSoft NA Payroll
It is basically a system that is considered when it comes to the management of the skills, potential, efficiency, as well as extra curricular activities of an employee working in an organization. It also enables organizations to represent the drawbacks associated with the employees and how they can be eliminated. Therefore, this approach is of significant importance and is best when it comes to keeping up the pace with the error-free efficiency in an organization.
It is basically a Human Resource application that is useful for combining the processes and systems in order to make sure that effective human resource management is going on in an organization. Several important and in fact, compiled HR functions are there which need to be combined to get the desired outcomes. This task is generally performed with the help of an HRM system.
It is basically an area where the users can define the assignment data in a clear manner. It is possible to utilize this data for the purpose of grouping the sets that matter a lot to the user. Whenever it comes to defining the eligibility of the elements, it is possible for the users to simply use them.
There are three important methods depending on the source of the feedback. The First is the 90 Degree Appraisals in which the source of the feedback of the employees is the Supervisor or the manager. The second is 180 Degree Appraisal in which the source of the feedback is nothing but the peers and the last one is the 306 Degree where the source of feedback are multiple such as managers, peers, supervisors, and so on.
It is basically an approach that is considered best because it makes sure that the large sections of data dealing with the transactions of the employees can be handled in a reliable manner. The fact is that almost all the transactions are actions driven and it is very common that employees made similar transactions multiple times during a specific period. When such a situation arrives at all the other transactions then the first needs prompt attention. This is done through the Job table which is prepared through effectively sequencing the information.
What are the terminal rules of an element?
Ans: Below are the three main rules of an element.
Actual Termination – It is used for a nonrecurring element. The entries will get closed when the pay date ends.Final Close – This will be used when the entries need to be opened beyond the leave period of an employee.Standard Process – It refers to the day that the employee is relieved of his employment.
PILOT INTERVIEW Questions And Answers! (How to PASS an Airline Pilot Interview)
1. What is CRM process as Airline Pilot? The systematic and effective use of all available resources to ensure a desirable outcome and completion of the flight. Focusing on communication, teamwork, task allocation, decision-making and situational awareness. The major contributors in the CRM process are: Dispatchers, flight attendants, maintenance, ATC and of course the cockpit crew.
2. What is the MAP on a non-precision approach? Non-precision: MAP is usually visually identified by a capitol and bold “M” in the Jepps or at the end of the solid line on NOS. There are several ways to id the MAP: Published DME at the MAP, Navaid such as the middle marker (MM), or timing from the FAF
3. What is the importance of proficiency in several languages for a pilot? A private pilot may limit himself to knowledge of English good enough to understand control towers. Other pilots, being more publicly involved figures by necessity, greatly benefit from knowing more than one language.
4. What is your Proudest accomplishment? Becoming a pilot and graduating from college as to be the biggest accomplish so far.
5. What is the 1-2-3 rule? Requirements for filing an alternate. 1-2-3: 1hr before to 1hr after estimated time of arrival, the weather must be forecast to be 2000′ ceiling and 3SM vis.
6. What makes a good captain or what do you expect from a Captain? one that is knowledgeable, decisive, conservative and safety conscious, good people skills, superior communication skills, solid piloting skills, can manage stress and avoid confrontation
7. List your qualifications as a pilot? Besides relevant college degree(s), pilots graduate from flying school and participate in annual additional training.
8. What is GRID MORA? It’s an altitude derived by Jepp or provided by state authorities. If derived by Jepp, Grid MORA clear all terrain and structures by 1000′ in areas where highest elevations are 5000′ MSL or lower. MORA values clear all terrain and structures by 2000′ in areas where highest elevations are 5001′ MSL or higher. Grid MORA (State) altitude supplied by the State Authority provides 2000′ clearance in mountainous areas and 1000′ in non-mountainous areas. Also… a +/- denote doubtful accuracy but are believed to provide sufficient reference point clearance.
9. What is the definition of CRM? CRM is a system which allows optimum use of all available resources – equipment, procedures, interpersonal communication, team work – all to promote safety and enhance efficiency in operations
10. What is Vso of your most recent aircraft? Cessna 172 is 41Kts
11. What is the max distance from the runway if you were to circle to land? Depends on your speed
12. Have you applied anywhere else? Just be honest on this one. If you are in the job hunt, it’s normal to apply to several companies. It’s great to tell them that Cathay is your top choice, but it would be suspect to say Cathay is your only choice.
13. What is mach tuck? As the aircraft reaches critical mach the nose of the aircraft tends to pitch downwards due to the flow of air over the wing reaching supersonic speeds producing additional life and center of pressure moving rearward. As the center of pressure moves rearward the elevators become less effective, pushing the aircraft into a potentially unrecoverable dive.
14. What is tower’s NORDO signal to be cleared to land? Steady green
15. What is VMCG? minimum speed control in the ground
16. What is the difference between Blue, Green Airports? blue is IFR (has approaches) green is VFR (no approaches)
17. What is GRADIENT CLIMB? 3%
18. What is VMCA? Minimun Speed Control in the Air
19. What is windshear? its a change on direction and speed of the wind
20. What is MOCA? Minimum Obstacle Clearance that provides obstable clearance between Vor airways. It also ensures VOR coverage 22nm from the nearest VOR
21. What is hyperventilation? hyperventilation is when the body has too much Oxygen and not enough Co2
22. Ever had an emergency? yes, many over the years
23. Pilots have many simultaneous responsibilities during the flight. What can you tell me about this? Pilots navigate the flight, observe and direct the activities of the crew, check instruments, keep an eye on the weather, and monitor altitude and air traffic. Doing all these and more, often simultaneously, requires outstanding multi-tasking skills and power of concentration.
24. What are the max airspeeds in C airspace? 200 KIAS within 4 NM of Primary Class C Airport
25. How would you behave as the pilot of a plane during an emergency? Describe first what your emotional response would be. It is important to demonstrate, preferably through examples, that you can maintain your poise during such events, and that you possess enough presence of mind to activate emergency procedures and delegate duties among crew members as necessary.
26. Where do you see yourself in 6 months? with your company
27. Did you ever have to modify the flight course in the past? Pilots are able to modify the course in flight, if this is dictated by internal or external conditions. This is not a small responsibility and needs careful coordination with control towers and scrupulous attention to detail.
28. What Is V2? takeoff safety speed
29. What Is Max A/s In Class C? Airspeed maximum of 200 knots indicated within 4 nautical or 5 statute miles and 2500 feet above the ground of the primary airport.
30. What Are The Cdi/raim Sensitivities Of A Gps Outside 30nm? Inside 30nm? +- 5 mi +- 1 mi
31. What Is The Effect Of Aft Cg On Performance? rearward Cg gives better fuel efficiency
32. What Is An Lda? a precision approach that is offset from the runway, it may have GS
33. Where Is The Faf On A Vor/ils Approach? On a VOR approach, the FAP is whenever you are established on course inbound and the final decent may be started. For non-precision approaches, the FAF is the “Maltese Cross” and for precision, the arrow which identifies the GS intercept.
34. Why Cape Air? big airline paneer
35. What Kind Of Airspace Is Around Lax? Class B. Very congested airspace.
36. What Is V1? Take off decision speed
37. What is hypoxia? Lack of oxygen to body tissues
38. Why do you like Compass? I like the new modern equipment and I like the fact that it’s got flow through to/ is part of Northwest.
39. What is a squall line? It is a continuous narrow line active of thunderstorms ahead of cold front but can develop far removed of any front. May be too long to detour, too thick to penetrate. It forms very rapidly reach Max intensity in late afternoon or early evening. IT IS THE SINGLE MOST INTENSE WEATHER HAZARD FOR AIRCRAFT.
40. Why do you want to work for Allegiant? growing company, day trips, upgrade potential
41. Why Ameriflight? I’d like to fly cargo and gain the single-pilot IFR experience
42. Did you ever have a problem with an F/O? Yes
43. What is your clearance limit when cleared for the approach and then you loose coms? The published hold on the missed.
44. What is MEA? Minimum En Route Altitude, lowest altitude on that airway that assures obstacle clearance and acceptable navigational reception.
45. What is Definition of V2? Single engine climb speed until safe altitude or clear of obstacles
46. What is Definition of V1? on a balance runway it is the last chance for you to decide not to go if you have and emergency and still stop on the runway according to the air data
47. What is the definition of Hypoxia? Not enough Oxygen
48. What is the seating capacity of the Dash 8 100 and 300 and how many flight attendants you need? DA-100 (37) DA-300 (50) FA 1
49. Tell me the biggest factor as far as fuel conservation goes as it relates to a jet engine? TSFC thrust specific fuel consumption which directly inperpolates to power setting and altitude. Higher you climb the less fuel required. Throttle settings also have a say in conservation and relates more to maintenance issues which is why full throttle takeoffs are rarely done.
50. What qualities make a good captain? Confident, Diligent, Good CRM skills, Good Problem Solver
51. What’s your choice of base? PDX or Seattle
52. World Airways Pilot Interview Questions:
53. Flight Express Airline Pilot Interview Questions:
54. Lion Air Airline Pilot Interview Questions:
55. LAN Airline Pilot Interview Questions:
56. Miami Air International Airline Pilot Interview Questions:
57. Mokulele Airlines Pilot Interview Questions:
58. Ryan International Airlines Airline Pilot Interview Questions:
59. Seaborne Airlines Pilot Interview Questions:
60. XOJET Airline Pilot Interview Questions:
Name the components for setting a SmartHire template?
Ans: The following components are used for setting a SmartHire template.
Ans: Below are the types of organizational relationships available in PeopleSoft HRMS.
Ans: An employee can be assigned to a global assignment to monitor, track, dependants, etc., which will be helpful for companies who have branches in different geographical locations. The employees resident location will be the home location. The location where the employee moves will be the host location. The company can set international security through some options.
Ans: A checklist is a list of items that the HR uses to track the employees tasks that have to be accomplished and noted. To create a checklist, go to Setup HRMS, and select Common Definitions. Open Checklists, select Checklist, and select the type of checklist.
Want to Become a Master in Peoplesoft HRMS? Then visit here to Learn Peoplesoft HRMS Training.
Ans: PeopleSoft HRMS has three types of tables where data is stored.
Control tables – The accounting structure and processing rules of a transaction will be stored in a control table.Transaction tables – The transactions or the day-to-day activities will be stored in these tables.Prompt tables – The data that appears on the PeopleSoft application pages are retrieved from the prompt tables.
Ans: Standard hours can be defined by adding a standard hour rule setup through the installation table in Setup HRMS. The minimum, maximum hours, and default hours can be defined by admin for the HR system. When an employee job details are added with a job code, the standard hours and FTE will auto-calculate.
Ans: The following are the job level defaults available in PeopleSoft HRMS.
FAQ
How do I process payroll in PeopleSoft?
- Run the Time Administration process.
- Run the Publish Estimated Payable Time process.
- Run the Load Time and Labor to Payroll process.
- Run the Pay Calculation process.
- Run the Pay Confirmation process.
- Run the Extract Time and Labor Costs process.
What is PeopleSoft payroll?
What is HCM in PeopleSoft?
