- Q1. An example of end to end interface scenario implemented by you in your project. …
- Q2. Default Port numbers of FTP, SFTP and HTTP. …
- Q3. Difference between sap Pi 7.1 and Po 7.5. …
- Q4. Difference between soap and rest adapter. …
- Q5. Node functions in graphical mapping. …
- Q6. …
- Q7.
2) Is it necessary to create the partner profiles in case of file to idoc scenario?
NO, it is not always necessary to create the partner profiles in case of file to idoc scenario if you are doing it for testing purposes otherwise you have to configure partner profile to assure XI for receiver client.
Monitoring after Go Live, troubleshoot performance issue when a ticket arises, on development part it will be creating BS, objects in IR, configuring in ID
Based on the scenario that what you are working in the low-level Working on SLD, IR, ID, RWB + developing the scenario’s+Documentation + Based on the requirements design + monitoring check + Performance+..etc
The encryption of the data sent to the Oracle database is taken care by the JDBC driver and not by the PI as each and every database provides there own data encryption feature.
1.Configure message compression on PI/PO application level by setting the following two properties in NWA -> Configurations -> Infrastructure -> Java system properties -> Services -> XPI Service: Messaging System.
Create a mapping and keep only those fields(i.e. segment E1BP1011) which you want to send to the target. And do the Content Conversion then.
11) What is the use of the Integration server? What are the components in the Integration server?
This is one of the key components of SAP PI system and is used for processing of messages. It consists of three engines:
A visibility level (RZ20 -> “Extras” -> “Display options”) helps in classifying each monitor tree. The monitor tree displays the objects which correspond to this level. The complete subtree is visible irrespective of the visibility level, if an alert appears for any object in the tree. This may result in the monitor tree to disappear post an alert is reset and the node is presented with a gray background.
13. What should you do if actions in the tree are executed for elements other than those expected?
When the monitor is saved, the selections for nodes are saved and retained in the tree (RZ20). Even if the selected nodes are invisible as the corresponding subtree has not been expanded; this will continue to happen. Thus, even if the selected nodes are invisible; these actions can be executed. The remedy to this is that one can click the “Deselect all” button and then reselect the required nodes again.
It is important to make a selection by setting the corresponding flag (checkbox) when analyzing the open alerts of an MTE. Here, the position of the cursor has no effect.
Unless there is any further notice on an SNMP basis, the externalization of the R/3 alerts will not be carried out. This was not the case previously. Though, many partners (see SAPNet) offer agents which read the MIB and continue with the help of SNMP. For this purpose, SAP makes corresponding C libraries available. This helps in downloading from SAPSERV*.
To link external tools directly through the SNMP to the monitoring infrastructure is not a planned activity. However, in case of a possible MIB enhancement, the partners are notified.
Syslog threshold value maintenance is carried out with Transaction RZ06 up to and including Release 4.0B not like other MTEs.
An authorization for object S_RZL_ADM is carried out within RZ20 to start the transaction. However, no additional authorization checks are carried out within RZ20.
Time differences are caused when the time zones are not active. One can use 91667 and 0100442.
Listed below are the steps that are used to monitor an application server which is hidden in the display Transaction RZ20:
This helps in hiding the monitoring of the RZ20. The monitoring runtime environment remains (report values, possibly triggers alerts, etc.). If the monitoring runtime environment is shut down, the profile parameter alert/MONI_SEGM_SIZE=0 should be set.
23. What do users get only nodes with icons without node names and how can this be rectified?
This is caused when the monitoring segment in the shared memory is filled which prevents additional nodes from getting created correctly.
This can be rectified by increasing the profile parameters alert/MONI_SEGM_SIZE on the affected application server and restart the application server. See 135503.
24. Why could be the possible reason for Logical command as tool (RZ21) not getting started?
Select external command in the tool definition under Call type in RZ21 up to and including Release 4.5B. But, if a function that executes the logical command when starting the tool via RZ20 is missing in the source code of RZ20 then the execution of the tool has no effect. From Release 4.6A one can no longer select external command in RZ21.
In some releases, there is a method CCMS_NT_EVENT in RZ21 which is proposed to execute the logical command Z_SEND_ALERT. This method definition can be deleted in RZ21.
“Writing a Data Supplier for the R/3 Release 4 Alert Monitor” below the alias System Management -> System Monitoring and Alert Management
26. What could be the possible reason if the current status of an MTE is red, but no alert exists?
Occasionally a node in the Current status displays a red message but no alerts usually exist for it.
As the alert is finished for Open alerts everything is green. But, as the last red message is still the presently valid message, therefore, the Current status is still red.
When a note is displayed in grey and if no new values are reported, one should specify. CAUTION: The node will never become inactive if this value is set to 0.
Like this, an entry is made in the shared memory for MTE and the alert generation is disabled. Use the 4.6D kernel, in order to make this work correctly.
SAPSYS within the AutoABAP SAPMSSY6 controls short-term data acquisition programs. Nothing is required to be defined here. The long-term data acquisition programs run in the background job SAP_CCMS_MONI_BATCH_DP. By pressing a button this job is activated; it is then automatically planned and activated. The long-term data acquisition programs run under the user (and relevant user authorization) are executed in the background who activates the background job as given below:
Technical Infrastructure-> Method execution -> Activate background processing. Please activate the background job once for each monitored system.
In order to do this, the interface definition of the module must meet the necessities explained in the White Paper
SAP PI Interview Questions
Top SAP PI Interview Questions
SAP NetWeaver XI integration where the Involvement of charing the information between SAP and Non SAP System comes into Picture. Implementation where the SAP involvement in the business coming into the Picture.
Go Alive After Developing the interface after coming across various stages like testing the Interface is made alive or used to the real-time scenario is said to be GO ALIVE.
Q What is the CCMS button in RWB?
It is an alert or monitoring for the error messages. To monitor SAP components. CCMS is SAP Computing Center Management System. RWB is smoothly integrated with CCMS and CCMS alerts can be viewed thro’ the Runtime WorkBench. It provides alert monitoring for SAP Exchange Infrastructure Which is used for monitoring any system errors and administration errors. Enables monitor entire system centrally.
When the monitor is saved, the selections for nodes are saved and retained in the tree (RZ20). Even if the selected nodes are invisible as the corresponding subtree has not been expanded; this will continue to happen. Thus, even if the selected nodes are invisible; these actions can be executed. The remedy to this is that one can click the “Deselect all” button and then reselect the required nodes again.
In some releases, there is a method CCMS_NT_EVENT in RZ21 which is proposed to execute the logical command Z_SEND_ALERT. This method definition can be deleted in RZ21.
In order to do this, the interface definition of the module must meet the necessities explained in the White Paper
When a note is displayed in grey and if no new values are reported, one should specify. CAUTION: The node will never become inactive if this value is set to 0.
13. What should you do if actions in the tree are executed for elements other than those expected?
Insights as to why Choosing SAP as a career will be beneficial
SAP is an unquestionably well-paid and long-term career option. As per research the average salary for an SAP PI is 8,24,739 in India. The year 2021 witnessed an increasing diversified job in SAP. As we are getting acquainted post pandemic with what we call the new normal, many organizations are forced to agree that cloud-based services are profitable compared to on-premises.
In 2020 projection, SAP PI 7.5 will continue to be on release until 2027 with maintenance extending up to 2030. It also projects successor to PI to be SAP Integration Suite (CPIS) that’s proof of an ongoing successful career.
FAQ
What is SAP PO used for?
Is SAP PI and SAP PO same?
Is SAP PI PO middleware?
